Chinese wholesale Fiber Laser Machine - Taiwan quality Chinese price MVP1166 Machine center – BiGa

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Surface Grinding 450150 Automatic Polishing Machine , Dro For Milling , Dro For Milling , Never-ending improvement and striving for 0% deficiency are our two main excellent policies. Should you need anything, never be reluctant to speak to us.
Chinese wholesale Fiber Laser Machine - Taiwan quality Chinese price MVP1166 Machine center – BiGa Detail:

The main technical parameters

Processing size

Model Unit MVP 1166
Work table
Table size mm(inch) 1200×600(48×24)
T—solts size( solt number x widthx distance) mm(inch) 5×18×110(0.2×0.7×4.4)
Maximum load Kg(lbs) 800(1763.7)
Travel
X-axis travel mm(inch) 1100(44)
Y—axis travel mm(inch) 600(24)
Z—axis travel mm(inch) 600(25)
Distance from Spindle nose to table mm(inch) 120-720(4.8-28.8)
Distance from spindle center to column surface mm(inch) 665(26.6)
Spindle
Spindle taper type BT40
Spindle Speeds r.p.m 10000/12000/15000
Drive type Belt-tvpe/Directly coupled/Directlv coupled
Feed rate
Cutting feed rate m/min(inch/min) 10(393.7)
Rapid on (X/Y/Z) axes m/min(inch/min) 36/36/30
(X/Y/Z) fast moving speed m/min(inch/min) 1417.3/1417.3/1181.1
Automatic tool changing system
Tool Type type BT40
Tool capacity set Arm 24T
Maximum tool diameter  m(inch) 80(3.1)
Maximum tool length m(inch) 300(11.8)
Maximum tool weight  kg(lbs) 7(15.4)
Tool to tool change  sec 3
Motor
Spindle drive motor
Contimious operation / 30 min rated
(kw/hp) MITSUBISH
7.5/11
(10.1/14.8)
Servo drive motor X, Y, Z axis (kw/hp) 3.0/3.0/3.0
(4/4/4)
Machine floor space and weight
Floor space mm(inch) 3900×2500×3000
(129.9×98.4×118.1)
Weight kg(lbs) 7800(17196.1)

Machine Center
Transmission parts

Quality assurance

During the assembly of the fuselage, each process is quality controlled according to the 50% tolerance of the national standard, which effectively reduces the overall deviation caused by the cumulative error. After the assembly is completed, 72 hours of copying machine operation is performed to monitor various indicators such as noise, vibration, rapid movement, and tool change. Advanced equipment such as laser interferometer, ball bar, dynamic balance instrument and three-coordinate measuring instrument are used to inspect the machine tool, parts trial processing inspection, heavy cutting inspection and rigid tapping inspection, to ensure that all performances meet the factory’s high quality requirements .

Use environment

1. Operating temperature of equipment environment: 10 ℃ ~ 40 ℃.

2. Relative humidity of use environment: should be controlled within 75%.

3. The equipment should avoid the radiation and vibration of other higher heat sources to avoid machine tool failure or loss of machine tool accuracy.

4. Voltage: 3 phases, 380V, voltage fluctuation within ± 10%, power frequency: 50HZ.

If the voltage in the area of use is unstable, the machine tool should be equipped with a regulated power supply to ensure the normal operation of the machine tool.

5. Air pressure: In order to ensure the normal working performance of the equipment, if the compressed air of the air source does not meet the requirements of the air source, an air source purification device (dehumidification, degreasing, filtration) should be added before the machine tool intake air.

6. The machine tool should have reliable grounding: the grounding wire is a copper wire, the wire diameter should not be less than 10mm², and the grounding resistance is less than 4 ohms.

7. The ground wire of each CNC machine tool should be connected to a separate ground rod.

8. Grounding method: Drive a copper rod with a diameter of about Φ12mm into the underground 1.8 ~ 2.0m. The ground wire (the diameter of the wire is not less than the diameter of the power cord) must be reliably connected to the ground rod with screws.

CNC Milling Machine
CNC Milling Machine2
CNC Milling Machine3
CNC Milling Machine4
CNC Milling Machine5


Product detail pictures:

Chinese wholesale Fiber Laser Machine - Taiwan quality Chinese price MVP1166 Machine center – BiGa detail pictures


Related Product Guide:

We're going to commit ourselves to giving our esteemed buyers using the most enthusiastically considerate solutions for Chinese wholesale Fiber Laser Machine - Taiwan quality Chinese price MVP1166 Machine center – BiGa , The product will supply to all over the world, such as: Indonesia, belarus, Indonesia, Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to offer our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We are ready to face the worries and make the improve to understand all the possibilities in international trade.
  • With a positive attitude of "regard the market, regard the custom, regard the science", the company works actively to do research and development. Hope we have a future business relationships and achieving mutual success.
    5 Stars By Julie from Hungary - 2017.09.28 18:29
    The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
    5 Stars By Brook from Canada - 2018.11.28 16:25
    Write your message here and send it to us